Mediciti

BIEN AIROTOR - PRESTIGE L

(0 Reviews)

Availability :

In Stock

Airotor handpiece

57275 57275

Quantity:

Check Availability at

Eligible for Cash on Delivery Usually Delivered in 2-4 days

Easy Returns and Replacement

Payment Options (Credit Card, Debit Card, Net Banking, COD)

DESCRIPTION
REVIEW

Type - Turbine with light, small head
Connection - Using 4-way Unifix quick-connect coupling, rotating 360 degree
Speed of rotation - 335,000 rpm
Recommended air pressure - 3.1 bar
Cooling - Diffuser, with 3 separate air and water sprays, water antiretraction valve
Chuck locking mechanism - Push-button with anti-heating system
Light transmission - Multi-strand optical glass conductor
Lighting - Halogen
Cleaning/Sterilisation - Thermo washer disinfectable / Steam autoclave up to 135 degree C
Weight - 73 g
Prestige L ref. - 1600380-001
Prestige L + 4-way Unifix set ref. - 1700184-001

MAINTENANCE OF TURBINES.

REMOVING THE INSTRUMENT

Remove the rotary instrument from the chuck mechanism

PRE-DISINFECTION

External disinfection

Do not immerse the instrument in a disinfectant bath.

CLEANING

CLEAN UNDER RUNNING WATER AT <38°C

REMOVING DIRT/DEPOSITS

Carefully remove all traces of dirt or deposits from the spray nozzles using the Bien-Air cleaning wire
Dry the nozzles with compressed air then dry the rest of the instrument with a cloth

Do not immerse in an ultrasonic cleaner

INTERNAL AND EXTERNAL CLEANING WITH SPRAYNET

Shake the Spraynet before use
Use the Spraynet attachment 1
(for 2-/3-way and 4-way turbines, see inset below)
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the Spraynet button down for 1 second
Clean the exterior of the turbine with a cloth soaked in Spraynet

FOR 2-/3-WAY AND 4-WAY TURBINES ONLY

C'.

CLEANING THE INSIDE WITH SPRAYNET FOR 2-/3-WAY AND 4-WAY TURBINES ONLY

Use the Spraynet attachment 2
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the Spraynet button down for 1 second

Spray into the opening as shown in the illustrations for “2-/3-way” and “4-way”

DISINFECTION

DISINFECTION USING SURFACE DISINFECTANT (follow the manufacturer's instructions for use)

Do not immerse the instrument in a disinfectant bath

THERMAL DISINFECTION (follow the manufacturer's instructions for use)

LUBRICATION

LUBRICATION WITH LUBRIMED

LUBRICATION WITH LUBRIFLUID

Shake the Lubrifluid before use
Use the Lubrifluid attachment 2, 3 ou 4depending on the type of instrument * (For 2-/3-way and 4-way turbines, see inset below)
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the Lubrifluid button down for 1 second
Then, run an operating test for 30 seconds at low speed to remove any surplus lubricant
Store immediately: store the instruments with the tip pointing downwards so that any oil residues can flow out

FOR 2-/3-WAY AND 4-WAY TURBINES ONLY

B'.

INTERNAL LUBRICATION WITH LUBRIFLUID FOR 2-/3-WAY AND 4-WAY TURBINES ONLY

Use the Lubrifluid attachment 2
Keep the tip of the instrument pointing down and protect with an absorbent cloth; press the Lubrifluid button down for 1 second

Spray into the opening as shown in the illustrations for “2-/3-way” and “4-way”

STERILISATION

PLACE THE TURBINE IN A STERILISATION BAG

STERILISE IN ACCORDANCE WITH THE MANUFACTURER'S INSTRUCTIONS

Instruments bearing the "135°C" symbol can be sterilised in an autoclave

Only sterilise instruments which have been cleaned and lubricated

Customer Reviews

No review found..