Super-Bond Universal Ceramic Primer is a priming agent for ceramic surface including zirconia. Application of the product on a ceramic/ zirconia surface before bonding with a dental adhesive resin cement such as Super-Bond C&B and SEcure will improve the bond strength and durability.
ADVANTAGES:
INDICATION:
Safety
Please keep the following precautions for safe use.
Applications
Use Super-Bond Universal Ceramic Primer only for the applications recommended in this leaflet.
Past history of sensitivity
Super-Bond Universal Ceramic Primer should not be used by clinicians / technicians or on patients who are methacrylic monomer-sensitive.
Symptomatic irritation
Cease using Super-Bond Universal Ceramic Primer immediately, if signs of irritation such as rashes appear, and see a doctor.
Avoid contact
Avoid contact with soft tissue, skin or eyes. A rubber dam is recommended for intraoral use. Contaminated skin or mucosa should be wiped off immediately with alcohol and then thoroughly rinsed with running water. If Super-Bond Universal Ceramic Primer enters the eye, immediately rinse thoroughly with running water. The patient should be examined by an ophthalmologist. Be sure to wear dental gloves.
Give care to flammability Liquid A and Liquid B are flammable. Do not store where they may be exposed to open flame.
Storage conditions
Store the Liquid A and Liquid B in a cool, dark location. High temperature, high humidity and direct sunlight will shorten their shelf-life.
Volatility
Liquid A and Liquid B are highly volatile. Recap the bottles immediately.
Contamination
Do not mix the bottle caps. Plastic Dispensing Dish is disposable. Do not reuse, and avoid using with other materials.
1 . Pretreatment of the ceramic/ zirconia surface
Remove contaminants and stains from the ceramic/ zirconia surface. Depending on the case at hand, clean by use of abrasive wheels and points or a prophy cup with fluoride-free, oil-free pumice, then rinse thoroughly with water and dry. *Applying the Red Activator/ Enamel Etchant Gel will help remove surface contaminants. *Ultrasonic cleaner is also effective.
2 . Preparation of the mixture of Liquid A and Liquid B
Dispense Liquid A and Liquid B to a well of a Plastic Dispensing Dish and mix with an application sponge. [Mixing Ratio] Liquid A / Liquid B = 1 / 1
*The mixture becomes usable immediately.
*The mixture is volatile. Use quickly after mixing
3 . Application of Super-Bond Universal Ceramic Primer
Using an application sponge, apply the mixture to the ceramic/ zirconia surface to be bonded.
*Blow lightly if the liquid remains in a dent.
*Application of the mixture to tooth or metal surface will not affect the adhesion.
4 . Bonding Operation
Apply the adhesive resin cement following the instructions. *Carefully avoid contamination of the applied surface, and apply the resin cement quickly.
CLINICAL APPLICATIONS:
Restoration of ceramic/ zirconia · Repair of a fractured ceramic/ zirconia tooth
Adhesion of ceramic/ zirconia-based all-ceramic crown or inlay
Adhesion of ceramic/ zirconia veneer
