Metafil Flo is a highly-flowable, visible-light-cure, tooth-shade composite resin based on unique monomer combination and containing inorganic fillers and an organic filler which is reactive with the matrix.This feature enables direct injection into the cavity without instrumentation, and gives the finished restoration radio-opacity and wear-resistance.

ADVANTAGES:

• Ideal flow consistency
• Excellent polishability
• Low water sorption
• Minimal wear

INDICATIONS:

• Direct Restoration for Class III & Class V
• Direct Restoration for minimal Class I
• Pit & Fissure Sealant
• Repair of small defects in Ceramic/Resin restorations.
• • Highly adaptable resin composite
  • Contains organic fillers and unique organic filler which is very reactive with the matrix resin
  • This assures superior handling and highly wear resistant restoration
  • Metafil Flo is a radio-opaque,with low shrinkage and deep depth of cure
  • It is suitable to use for base build up material as well.

  • TECHNICAL DATA:

    • Compressive Strength : 440 MPa
    • Flexural modulus : 3.5 Gpa

     

    PRECAUTIONS:

    • Metafil Flo should NOT be used either by clinicians or on patients who are methacrylate-monomer sensitive.
    •  Avoid contact of Metafil Flo with soft tissues, skin or eyes. Contaminated skin or mucosa with Metafil Flo should be wiped off immediately with alcohol and then rinsed thoroughly with running water. If Metafil Flo enters an eye, rinse the eye with running water immediately. The patients should then be examined by an ophthalmologist.
    • Dentist should wear rubber or PVC dental gloves.
    • Use Metafil Flo only for the applications recommended in this leaflet.

    STORAGE:

    • Storage Avoid high temperatures above 30?C and direct sunlight.
    • Refrigeration is not necessary.
    • However, if stored in a refrigerator, then allow the material to warm to room temperature prior to use.

    • Adhesive Bonding System :

      Metafil Flo is compatible with currently available dentin bonding agents including AQ Bond Plus from Sun Medical Co., Ltd. Apply the adhesive agent on the prepared surface according to the relevant instructions.

      Placement and Curing :

      A. Remove the cap by turning it counter-clockwise.
      B. Screw the Needle Tip tightly to the syringe.
      C. Dispense Metafil Flo through the Needle Tip to the cavity previously treated with a dentin adhesive.
      D. Light-cure for at least 30 seconds using dental visible-light curing device, remove the Needle Tip and recap the syringe. • For best handling, use Metafil Flo at room temperature.

       The use of an unfilled resin prior to Metafil Flo placement is unnecessary in most cases. However, should the clinician desire an unfilled resin, Metafil Flo is compatible with most bis-GMA and UDMA type unfilled resins.

       If the cavity preparation is large and/or deep, incremental filling techniques should be employed.

      Polishing :

      Metafil Flo will polish quickly and easily to a high luster. Use of most discs or polishing paste systems are acceptable